Search found 235 matches
- Tue Jan 22, 2019 8:44 pm
- Forum: Hull and Deck
- Topic: bushing below the waterline
- Replies: 3
- Views: 26050
Re: bushing below the waterline
Here is some more about thru-hull installation. This is what I did. Most of my method was copied from here , except for the way the backing plate-to-seacock studs were installed. I wanted to install flush mount thru-hulls, but the original fittings had a very narrow lip compared to the replacements,...
- Tue Jan 22, 2019 6:14 pm
- Forum: Hull and Deck
- Topic: bushing below the waterline
- Replies: 3
- Views: 26050
Re: bushing below the waterline
Hi, Welcome to the Ballad Forum, and congratulations on your new boat. I did a similar job on my Ballad. The original thru-hulls are called "flush" thru-hulls, as opposed to surface mount ones. When I removed mine I found the replacement fittings had a different shape so the fibreglass had...
- Sun Jan 06, 2019 6:27 pm
- Forum: Hull and Deck
- Topic: Looking for a Stanchion Base
- Replies: 0
- Views: 43591
Looking for a Stanchion Base
Recently while at anchor another boat caught my lifeline and bent the midship's stanchion badly. I've managed to straighten the stanchion, but the base was split. I had it welded up but it's pretty ugly and of questionable strength. If anyone has a spare base, or maybe an alternative idea, please le...
- Fri Oct 12, 2018 11:46 pm
- Forum: Hull and Deck
- Topic: Beaching Legs
- Replies: 6
- Views: 36287
Re: Beaching Legs
Old post ... here I go again :lol: In the end I found a beach site that I could dry out on, leaning against a couple of pilings, and changed the transducer. I do a haul-out every second year, with a diver in between to give the bottom a scrub and to change the zincs. I liked the independence of havi...
- Sat Sep 15, 2018 3:16 am
- Forum: Rig and Sails
- Topic: Mast Wedges
- Replies: 11
- Views: 53270
Re: Mast Wedges
Ted, not sure if this is what you want, but it's all I have on file.
Hope this helps.
Hope this helps.
- Sat Jun 16, 2018 4:25 pm
- Forum: Hull and Deck
- Topic: Rudder axial load
- Replies: 7
- Views: 36555
Re: Rudder axial load
Ted, another thought: I could send you the ones I removed from #1085. They were still good (but not new, see pictures earlier in this thread).
- Sat Jun 16, 2018 3:41 pm
- Forum: Hull and Deck
- Topic: Rudder axial load
- Replies: 7
- Views: 36555
Re: Rudder axial load
Ted, I get the hint, but would only do something like that if I had the rudder etc. on hand here to make sure of a perfect fit. I'm pretty sure these bushings are available ... somewhere. You might want to contact Vega Marin and see if they have any, or know where to get them. This is another possib...
- Tue Jun 12, 2018 12:14 am
- Forum: Videos
- Topic: #1085 "Pagan" stretches her legs
- Replies: 0
- Views: 63195
#1085 "Pagan" stretches her legs
Just a short video shot by a friend as we worked our way up the west coast of Widbey Island, Washington State, USA.
- Fri Jun 08, 2018 3:40 pm
- Forum: Hull and Deck
- Topic: Rudder axial load
- Replies: 7
- Views: 36555
Re: Rudder axial load
Hi Ted, I'm trying to relate the picture you posted to the one I posted. :?: It appears to be a whole different set-up. Could you post a picture of the whole stern showing rudder and skeg, top to bottom? Thanks! Edit: Ah, I see ... the picture is sideways ... silly me! Can you lift the rudder by han...
- Tue May 22, 2018 4:21 am
- Forum: Hull and Deck
- Topic: Rudder axial load
- Replies: 7
- Views: 36555
Re: Rudder axial load
Hi, and welcome to the forum! The only 'dumb' question is the one that goes unasked :lol: The rudder shaft is held by three bushings: One at the top, one at the bottom of the tube passing through the hull, and one at the bottom, in a 'shoe' that is held to the tip of the skeg by three through-bolts....