Hi everybody. Thank you for all the descriptions and photos - it’s been a great inspiration and help. I am the worrying type (I guess) so after reading about your investigations of the truss and having talked to a fellow danish ballad-sailor (with an almost corroded away truss) I decided to remove my truss even though I had no obvious signs of corrosion - only some thin cracks in the poor...
this is what the truss looked like.. I am now planning on a refit (after sandblast, reinforcing and galvanize). I lean towards the “no poor solution” as described by Bob McGovern earlier in this post. Does anyone know of any followup? All input is welcome:-)
Mast step truss, inevitably:(
Re: Mast step truss, inevitably:(
- Attachments
-
- E2BA36AC-04A3-4F7C-99A7-7C106CA239F4.jpeg (121.42 KiB) Viewed 42532 times
-
- 3E08B32A-9D1A-42DE-9770-E42CE67FB898.jpeg (160.97 KiB) Viewed 42532 times
Re: Mast step truss, inevitably:(
Just curious .... what is the hull or sail number of your Ballad?
Peter http://www.mostlyaboutboats.ca
==================
Victoria, BC, Canada
Albin Ballad Restoration Photo Album
==================
Victoria, BC, Canada
Albin Ballad Restoration Photo Album
-
- Posts: 287
- Joined: Fri Oct 26, 2012 3:08 am
- Location: Wyoming, USA
Re: Mast step truss, inevitably:(
That's really useful, to see a galvanized (later sail #) truss out of its encapsulation. It looks pretty good! Astonishing they didn't galvanize the early steel.
We haven't launched yet, but I believe any mast step solution that drains away water and allows air circulation will last forever if built of good materials. You could probably de-scale the old truss, hit it with some spray galvanizing (or take it to a dip-galvanizing shop) and put it back in place. You want to brace it well to keep the foot in place & hold it in column; provide some limber holes to carry water into the main bilge, and you are good.![Smile :)](./images/smilies/icon_e_smile.gif)
We haven't launched yet, but I believe any mast step solution that drains away water and allows air circulation will last forever if built of good materials. You could probably de-scale the old truss, hit it with some spray galvanizing (or take it to a dip-galvanizing shop) and put it back in place. You want to brace it well to keep the foot in place & hold it in column; provide some limber holes to carry water into the main bilge, and you are good.
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: Mast step truss, inevitably:(
Den149 wrote: ↑Sat May 02, 2020 5:50 am Sailnumber 1069. I think the build is in 1976.
Regards Jens Chr
Mine is #1085, and I was told it was also a 1976 model. I'll rest easy now that I know what a truss of that vintage looks like.
I check the shroud tension periodically with a Loos Gauge. Loose shrouds would be a good warning flag of a collapsing mast step truss.
Peter http://www.mostlyaboutboats.ca
==================
Victoria, BC, Canada
Albin Ballad Restoration Photo Album
==================
Victoria, BC, Canada
Albin Ballad Restoration Photo Album