home made bollards

Post Reply
wolfee101
Posts: 3
Joined: Mon Jul 07, 2014 7:20 pm

home made bollards

Post by wolfee101 » Wed Apr 08, 2020 3:45 pm

I`ve made 3 bollards for the ballad cheaply in cost, expensive in time. this may help with both those problems

2 rear are 30mm diameter 280mm long (made longer due to manufacturing) will saw to size before fitting

1 forward 40mm dia x 370mm
lathe was made from videos on youtube

PARTS

made from english oak from ebay £17 inc delivery (teak was expensive and difficult to get, also was not sure this would work)
i would use teak if i started again.
wood dimensions 100cm x 7cm x 5.5cm this was about the right size ......28cm was leftover.

bolts 10cm x M8 £2
M8 pronged T nut £1=10
bearings 608ZZ you need 4 but 2 needed replacing so 6 overall cost £5 for 10
wood to make lathe 2400mm x 90mm x 45mm £7
electric drill, normal wood chisel 25mm width, vernier gauge ,sandpaper
20200408_125901.jpg
20200408_125901.jpg (70.39 KiB) Viewed 6433 times
20200408_125411.jpg
20200408_125411.jpg (42.67 KiB) Viewed 6433 times
20200408_125359.jpg
20200408_125359.jpg (54.94 KiB) Viewed 6433 times
20200404_085828.jpg
20200404_085828.jpg (112.55 KiB) Viewed 6433 times

Post Reply