Cabin Windows

Post Reply
Symystic
Posts: 16
Joined: Fri Oct 28, 2016 3:24 am

Cabin Windows

Post by Symystic » Thu Aug 17, 2017 2:27 am

The two forward windows of my Ballad leak. The weather seal/gasket between the glass and frame need to be replaced. Has anyone done this? Does anyone know of a source for the gasket? Thanks mark

Bob McGovern
Posts: 277
Joined: Fri Oct 26, 2012 3:08 am
Location: Wyoming, USA

Re: Cabin Windows

Post by Bob McGovern » Thu Aug 17, 2017 8:28 pm

Hard to find that gasket material, tho I believe the company that made the aluminum frames is still in business. They may have some? I'd just use fat butyl tape in its place. Two things we noticed messing with our fixed ports:

-- The inner and outer trim rings are connected via stainless screws tapped into aluminum channel, and (as is typical on older boats) the aluminum has turned to powder via galvanic corrosion. You may find the screws are hard to budge, and that they strip out the aluminum once you do break them loose. I'd plan on thru-bolting the trim rings. Stronger & more water-tight, anyhow. ;)

-- The coachroof sides around the windows are still a sandwich, tho the foam line there is very thin -- about 1/8" or less. That foam allows a shocking amount of water ingress into the side decks if the window seals are not perfect. We gouged out the foam and filled the gap with thickened epoxy, all the way around the openings.

User avatar
prjacobs
Posts: 225
Joined: Fri Oct 12, 2012 4:06 pm

Re: Cabin Windows

Post by prjacobs » Fri Aug 18, 2017 4:26 pm

If it's any help, I found this company when I was doing my Ballad restoration. My windows turned out to be OK so I didn't follow up with them.

Arivaca
Posts: 2
Joined: Thu Aug 02, 2018 3:19 pm

Re: Cabin Windows

Post by Arivaca » Thu Aug 02, 2018 3:56 pm

To Bob McGovern: may have iffy windows, and noticed your thread. Could you please tell me who made the frames? My boat is in the 1100’s Thanks.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests